Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Pacer Global LLC Saint Gobain SaniTech Ultra-C Tubing, 0.03" ID, 0.16" OD, 0.062" Wall, 50 Foot Coil, 1/EA
Saint Gobain SaniTech Ultra-C Tubing, 0.03" ID, 0.16" OD, 0.062" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint Gobain 082 C-Flex TPE Tubing, 0.063" ID, 0.125" OD, 0.031" Wall, 50 Foot Coil, 1/EA
Saint Gobain 082 C-Flex TPE Tubing, 0.063" ID, 0.125" OD, 0.031" Wall, 50 Foot Coil, 1/EA
AVANTOR MASTERFLEX (VWR LLC) C-FLEX TUBING 1/4INX3/8IN 50FT
NC2955104 C-FLEX TUBING 1/4INX3/8IN 50FT
AVANTOR MASTERFLEX (VWR LLC) Dow Corning Pharma-80 Tubing, 1/4"" (6.4) x 1/2"" (12.8), 50-ft pk
Applications: Pharmaceutical, biotechnology, and ultra-pure fluid processing. Characteristics: Semi-transparent platinum-cured silicone tubing with a very low extractable profile; it contains no phthalates, plasticizers, latex or other organic additives. Pharma tubing is hydrophobic, and remains flexible and resilient for long service life. Dow Corning maintains complete traceability from silicone to silicone tubing. Durometer, shore A rating of 75. Certification: Elastomer exceeds test guidelines for USP Class VI Plastics; tubing itself is FDA compliant, and meets 3A Sanitary Standards and European Pharmacopoeia (EP) Requirements. Pharma tubing is produced under Bulk Pharmaceutical (BP) current GMP principals. <
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, C-Flex, Clear, 1/32"" ID x 3/32"" OD; 25 ft
Applications: Pharmaceutical, biotech, and general-purpose lab uses requiring high performance. Economical alternative to platinum silicone. Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Transparent. Certification: Product is manufactured in accordance with Part 820 Quality System Requirements (GMP); and meets USP Class VI. Temperature range: -40 to 275¿F (-40 to 135¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) TUBING 1/8IDX1/4OD 50FT PER PK
NC2876108 TUBING 1/8IDX1/4OD 50FT PER PK
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Kynar Flex™ 2750 PVDF, 3/16"" ID x 1/4"" OD; 50 ft
Applications: High purity and temperature, UV sensitive, or aggressive chemical fluid transfer. Characteristics: Excellent chemical resistance, low TOC, rigid tubing works well with compression and over-molded fittings and adapters. Translucent. Certification: FDA complaint (21 CFR 177.2600), meets USP Class VI requirements, and is made in accordance to cGMP. Temperature range: -40 to 275¿F (-40 to 135¿C) Sterilize: Autoclave, gamma irradiation, or ethylene oxide.
Grainger Hose Fitting Sleeve 1/2 In
The Aeroquip Compression Sleeve Brass is a brass compression sleeve fitting used for connecting tubing in fluid power systems. It has a 0.25 inch tube size and is made from brass for durability and corrosion resistance. This compression sleeve has a maximum pressure rating of 5000 psi and temperature range of -65 to 300 degrees Fahrenheit. The fitting accepts 0.25 inch OD tubing and uses a ferrule and nut to form a secure, leak-free connection when properly installed. This brass compression sleeve fitting is ideal for use in hydraulic, pneumatic, lubrication, fuel and oil applications.
Avanti Polar Lipids 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(succinyl) (sodium salt) | 186800-61-3 | 814.0 g/mol | 500MG
1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(succinyl) (sodium salt) | 186800-61-3 | 814.0 g/mol | 500MG
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 1.02MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 1.02 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 2-Stop, Peroxide-Cured Silicone, 1.52 mm ID; 6/PK
Appearance: Opaque Temperature: -70 to 52¿C Life at 100 rpm: 1000 hrs The first of a series of two-stop extension tubing options is below under Accessories. See all of our two-stop extension tubing formulations or contact our Application Specialists for personal assistance.